NanoVNA-H4 10 KHz-1.5 GHz

The NanoVNA-H4 is a portable 10 kHz - 1.5 GHz vector network analyser designed to measure reflection and transmission coefficients of equipment without the need for a large analyser. The analyser has a 3.95" touch-screen that can show the measurements in 101 points. Furthermore, the NanoVNA-H has a built in 1950 mAh battery and can be connected to an android phone or PC via USB(-C). Both an WebApp for google chrome and an Android app are available controlling the analyser and displaying measurements

Specifications

ABS case: 75 mm × 133 mm × 18 mm (excluding protrusions)
Measurement frequency: 10 kHz – 1.5 GHz
RF output: 0 dBm (±2 dBm)

Measurement range:

70 dB (50 kHz – 300 MHz)
60 dB (300 MHz – 900 MHz)
40 dB (0.9 – 1.5 GHz)

There may be errors caused by nonlinear transformation of the fundamental wave when using harmonic measurement.

Port SWR: < 1.1
Display: 3.95-inch TFT (320 × 480)
USB interface: USB Type‑C, communication mode: CDC (serial)
Power: USB 5V 200 mA, built‑in 1950 mAh battery, maximum charging current 1 A
Number of scanning points: 101 (fixed)
Display tracking: 4
Markers: 4
Setting storage: 5
Frequency tolerance: < 2.5 ppm
Frequency stability: < 0.5 ppm

Included in the box

1 × NanoVNA host (with 1950 mAh battery)
1 × USB Type‑C data cable
2 × 15 cm SMA male‑to‑male RG316 RF cables
1 × SMA male calibration kit – OPEN
1 × SMA male calibration kit – SHORT
1 × SMA male calibration kit – LOAD
1 × SMA female‑to‑female connector
1 × Type‑C to Type‑C cable
1 × display touch tool