mAT-10 QPR ATU 30W 1.8MHz-54MHz Ft-817, FT-818

The mAT-10 is a compact and exquisite tuner designed for YAESU FT-817/818, it can also be used in other QRP transceivers. When it is connected to FT-817/818 through a dedicated control cable mAT-CY, it is a dedicated tuner, which can achieve convenient "one-key tuning". If no control cable is used, it is a universal QRP tuner for all low-power transceivers.

The mAT-10 is connected to the ACC port of the FT-817/818 transceiver through control cable. The ACC interface allows an external device such as a PC or the mAT-10 to control the FT-817/818 by sending it serial commands. The mAT-10 has the function of "one key tuning". When the multi-function key on tuner is pressed, the mAT-10 will automatically control the start-up tuning of transceiver.

When mAT-10 is used in other QRP transceivers, it does not need control cables and can work only by connecting RF cables. The tuning process can be completed by pressing the Multi-function on the panel, its operation is very simple.

Specifications:

- Max. 30W in SSB and CW modes, 5W in PSK and digital modes
- 1.8to 54.0 MHz coverage.16,000 memories for instantaneous frequency
- Tuning time: 0.1 to 5 seconds full tune, 0.1 seconds memory tune
- To tune the load capacity of 5 to 1500 ohm antenna
- For YAESU FT-817/818 radio via 8-core data cable
- Can also be used as a QRP tuner
- For dipoles, verticals, Vees, beams, long wire or any coax-fed antenna
- Dimensions: 13.8cm x 6.1cm x 2.3cm (L x W x H)
- Weight: 300g 

Package Included:

- 1 x mAt-10 Automatic Antenna Tuner
- 2 x 10440 lithium batteries
- 1 x Charger 
- 1 x Data Cable
- 1 x Manual