LDG Z-100A Tuner

A very affordable automatic antenna tuning unit for HF and 6 meters that is especially suitable for transceiers of the brand Icom. The IT-100 can of course also be used with other transceiers. The reconciliation unit is operated through your Icom transceiver or external source via the Icom-specific connector. The IT-100 has 2000 memories that allow for lightning-fast tuning once you've tuned the current frequency/antenna.

The IT-100 comes with an AH-4/AH-3 compatible strength bel that fits most Icom stations, and is used for control. With the control cable connected, only one press of "tune" on the transceiver is required to tune.

As a stand-alone reconciliation unit, it can be used for virtually all 100 W transceivers. You then check by laying out the carrier and pressing Tune on the IT-100.

For long wire, a balun is needed as well. Suitable balun is RBA-1.

Frequency range 1.8-54 MHz
Power 0.1-125 Watts (for 160-10 m)
          0.1-100 Watts (for 6 m)
Impedance area 4-800 Ohm (for 160-10 m)
          16-150 Ohm (for 6 m)
Drive via transceiver
Memories 2000 pcs
Connection control socket (fits AH-4/AH-3 compatible Icom transceiers)
          2 x UHF(f) (Antenna in/out)

Supplied with:

English user manual
Cable IC-100 for Icom AH3/AH4
Cable IC-104 for Flexradio & Elecraft
Cable IC-105 for Alinco DX70/DX77
Cable AT-300 for Kenwood AT-300 radio
Cable IC-108 for Yaesu FT-100/710/857/897/891/991/991A
Cable IC-109 for Yaesu FT-450/950/FTDX1200/FTDX10D
Cable IC-115 for Yaesu FTDX101/FTDX3000